Using the Camera with a Macintosh
Install the required software in accordance with what version of the Macintosh OS you are running and what you want to do.
When you want to do | Operating | Install this software: | See |
System | |||
this: | Version |
| page: |
|
|
| |
Save images to your |
|
|
|
Macintosh and view | OS X | Installation not required. | |
them there manually |
|
|
|
|
|
|
|
Save images to your |
|
|
|
Macintosh | OS X | Use iPhoto, which comes bundled | – |
automatically/Manage | with some Macintosh products. | ||
images |
|
|
|
|
|
|
|
|
| You can playback with QuickTime, |
|
Play movies | OS X | which comes bundled with your | |
|
| operating system. |
|
|
|
|
|
Connecting the Camera to Your Computer and Saving Files
Never use your computer to modify, delete, move, or rename any image files that are in the camera’s
Doing so can cause problems with the camera’s image management data, which will make it impossible to play back images on the camera and can drastically alter remaining memory capacity. Whenever you want to modify, delete, move, or rename an image, do so only on images that are stored on your computer.
IMPORTANT!
•Never unplug the USB cable, or operate the camera while viewing or storing images. Doing so can cause data to become corrupted.
•The camera does not support operation with Mac OS X 10.0. Operation is supported with Mac OS 10.1, 10.2, 10.3, 10.4, 10.5, 10.6, and 10.7 (using the OS standard USB driver) only.
NOTE
•You also can use your computer’s card slot (if it has one) or a commercially available card reader to access image files directly from the camera’s memory card. For details, see the user documentation that comes with your computer.
94Using the Camera with a Computer