3.Connect the USB cable to the camera.
The back lamp should light red, indicating that charging has started.
The back lamp will go out when charging is complete.
It takes about
130 minutes to achieve a full charge. Charging may take longer depending on charging conditions.
| ||
[USB/AV] |
| |
port |
| |
Small | USB cable | |
connector | ||
(included with camera) | ||
|
Making sure that the mark on the USB cable connector is towards the lens side, connect the cable to the camera.
Back Lamp Operation
Lamp Status | Description | Back lamp |
Lit Red | Charging |
|
| Abnormal ambient temperature, |
|
Flashing Red |
| |
| battery problem (page 118) |
|
Off | Charging complete |
|
4.After charging is complete, disconnect the USB cable from the camera and then unplug the power cord from the power outlet.
15 | Quick Start Basics |
|