The following explains how calculation results are displayed in accordance with the setting you specify.

•From zero to nine decimal places are displayed in accordance with the number of decimal places (Fix) you specify. Calculation results are rounded off to the specified number of digits.

Example: 100 ÷ 7 = 14.286 (Fix = 3)

14.29(Fix = 2)

•After you specify the number of significant digits with Sci, calculation results are displayed using the specified number of significant digits and 10 to the applicable power. Calculation results are rounded off to the specified number of digits.

Example: 1 ÷ 7 = 1.4286 × 10–1

(Sci = 5)

1.429 × 10–1

(Sci = 4)

•Selecting Norm1 or Norm2 causes the display to switch to exponential notation whenever the result is within the ranges defined below.

Norm1: 10–2> x, x > 1010

Norm2: 10–9> x, x > 1010

 

Example: 100 ÷ 7

= 14.28571429

(Norm1 or Norm2)

1 ÷ 200

= 5. × 10–3

(Norm1)

 

0.005

(Norm2)

A Specifying the Fraction Display Format

You can specify either improper fraction or mixed fraction format for display of calculation results.

Fraction Format

Perform this key operation:

Mixed Fractions

!,eeb(ab/c)

Improper Fractions

!,eec(d/c)

A Specifying the Complex Number Display Format

You can specify either rectangular coordinate format or polar coordinate format for complex number calculation results.

Complex Number Format

Perform this key operation:

 

 

Rectangular Coordinates

!,eeeb(a+bi)

Polar Coordinates

!,eeec(r∠Ƨ)

A Specifying the Statistical Frequency Setting

Use the key operations below to turn statistical frequency on or off during SD Mode and REG Mode calculations.

Frequency Setting

Perform this key operation:

 

 

Frequency On

!,ddb(FreqOn)

 

 

Frequency Off

!,ddc(FreqOff)

 

 

E-9