6.After inputting the program, press A or !5(EXIT).

To run the program you just created, press w here to display the RUN Program screen. For more information, see “Running a Program” below.

To return to the normal calculation screen, press ,b to enter the COMP Mode.A Editing an Existing Program1.Press ,g(PRGM)b(EDIT) to display the EDIT Program screen.

2.Use number keys b through e to select the program area that contains the program you want to edit.

3.Use e and d to move the cursor around the program, and perform the required operations to edit the contents of the program or to add new contents.

• Pressing f jumps to the beginning of the program, while c jumps to the end.4.After you finish editing the program, press A or !5(EXIT).

k Running a Program

You can run a program in the PRGM Mode or from another mode.A Running a Program from Outside the PRGM Mode1. Press 5.

P 1 P 2 P3 P4

1 2 3 4

2. Use number keys b through e to select a program area and execute its program.

A Running a Program in the PRGM Mode1.Press ,g(PRGM) to display the PRGM Mode initial screen.2.Press c(RUN).• This will display the RUN Program screen.

Program areas that already contain program data (P1 through P4)

RUN P r o g r am

 

P- 1234 670

Remaining program memory capacity

 

3.Use number keys b through e to select the program area that contains the program you want to run.

• This will execute the program in the program area you select.A What to do if an error message appears

Press d or e. This will display the editing screen for the program, with the cursor located at the location where the error was generated so you can correct the problem.

k Deleting a Program

You can delete an existing program by specifying its program area number.A Deleting the Program in a Specific Program Area1. Press ,g(PRGM) to display the PRGM Mode initial screen.

E-64