Parameter List |
|
| |
ParaID | Parameter | Bit*Len |
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
0000 | Fx Name | 7*16 | 20H - 7EH | - |
Operation
This module outputs the input tone without modification. It is used as the initial default condition.
Preset List
No Preset Name00 Thru4.8.6.2Stereo ThruSpecifications
TypeID |
| FXID_STTHRU = 0002H |
| |
I/O |
| 2/2 |
|
|
Available Part | DSP, Master |
|
| |
Parameter List |
|
|
| |
ParaID | Parameter | Bit*Len |
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
0000 | Fx Name | 7*16 | 20H - 7EH | - |
Operation
This module outputs the input tone without modification. It is used as the initial default condition.
Preset List
No Preset Name
00 Stereo Thru4.8.6.3Noise GateSpecifications
TypeID |
| FXID_NOI = 0010H |
| |
I/O |
| 1/1 |
|
|
Available Part | DSP |
|
| |
Parameter List |
|
|
| |
ParaID | Parameter | Bit*Len |
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
0000 | Fx Name | 7*16 | 20H - 7EH | - |
| |
0001 | Bypass | 1 | 0 | - 1 | 0 | ...Bypass |
|
|
|
|
| 1... | Effect |
0002 | Threshold | 7 | 0 | - 127 | 0 - 127 | |
0003 | Release | 7 | 0 | - 127 | 0 - 127 |
Operation
This module is for noise cancellation when there is no signal.The input signal is output
Effector function enable/disable. Selecting bypass causes the input signal to be output
Noise gate operation threshold level. Output is muted when the input signal is at or below the level specified here.
3.ReleaseTime the noise gate is closed when muting is performed.Preset List
No Preset Name
00 Stereo Thru
4.8.6.4System Noise GateSpecifications
TypeID | FXID_SYNOI = 0012H |
I/O | 2/2 |
Available Part | System Noise Gate |
Operation |
|
The
Preset List
No Preset Name
00 Stereo Thru
4.8.6.5Compressor/LimiterSpecifications
TypeID | FXID_COMP = 0100H |
|
I/O | 1/1 |
|
Available Part | DSP |
|
Parameter List |
|
|
ParaID Parameter Bit*Len |
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
0000 | Fx Name | 7*16 | 20H - 7EH | - |
| |
0001 | Bypass | 1 | 0 | - 1 | 0 | ...Bypass |
|
|
|
|
| 1... | Effect |
0002 | Attack | 7 | 0 | - 127 | 0 - 127 | |
0003 | Release | 7 | 0 | - 127 | 0 - 127 | |
0004 | Threshold | 7 | 0 | - 127 | 0 - 127 | |
0005 | Depth | 7 | 0 | - 127 | 0 - 127 | |
0006 | Level | 7 | 0 | - 127 | 0 - 127 |
Operation
This effector lowers the volume when the input signal is at or above a specified level. This function can be employed to achieve either of the two objectives described below.
CompressorVolume is raised when the input signal is small and lowered when the input signal is large. This suppresses wide variations in volume levels, which makes it possible to sustain decay type instrument tones longer.
LimiterSince the operation start level is set comparatively higher than that of the compressor, when the input signal as at or below a certain level, it is output
1.Bypass
Effector function enable/disable. Selecting bypass causes the input signal to be output
Level of attack for the signal rise. Theoretically,it controls the time it takes from the point the input signal rises to a preset level until the compressor/limiter effect is applied. A late attack keeps the signal attack part from being compressed, which makes it possible to maintain the attack only.
3.Release
Time from the point when the input signal drops below the threshold level until the compres- sor/limiter function stops
32