Using Phrase Memory

Phrase memory provides storage of nine phrases you can recall and input into your labels. Initially, phrase memory records 1 through 8 are preset with often-used disc label phrases. You can use these as they are or replace them with your own text.

The following are the initial contents of the phrase memory records. 1 Digital Image

2 Date Recorded:

3 Backup Data

4Confidential

5Hit Album

6Omnibus

7My Favorites

8Recorded At:

9<Empty>

To recall a phrase

1.While inputting text, press PHRASE MEMORY.

• This displays a list of available phrases.

2.Use the xand zcursor keys to select the phrase you want to recall, and then press SET.

•This recalls the phrase you selected and inputs it into the input screen.

•You could also select a phrase by inputting its record number, from 1 through 9.

•If the phrase you selected causes the number of input characters to exceed the allowable limit, the error message “ENTIRE PHRASE COULD NOT BE RECALLED!” appears for about one second. The phrase is partially input, up to the allowable limit.

To create new phrase memory text

1.Press PHRASE MEMORY.

2.Use the cursor keys to select [DATA EDIT], and then press SET.

3.Use the cursor keys to select MAKE, and then press SET.

4.Use the cursor keys to select NEW, and then press SET.

•The NEW / STRING→PHRASE screen does not appear if there is not text currently input on the text input screen.

5.On input screen that appears, input the text that you want, and then press SET.

6.Use the cursor keys to select the phrase memory where you want to store the text, and then press SET.

7.In response to the confirmation message that appears, press SET to save the phrase or ESC to abort.

To save input text in phrase memory

1.While inputting the text you want to save on the input screen, press

PHRASE MEMORY.

2.Use the cursor keys to select [DATA EDIT], and then press SET.

3.Use the cursor keys to select MAKE, and then press SET.

4.Use the cursor keys to select STRING→PHRASE, and then press SET.

5.On the input screen that appears, check the text and make any changes that you want and then press SET.

6.Use the cursor keys to select the phrase memory where you want to store the text, and then press SET.

7.In response to the confirmation message that appears, press SET to save the phrase or ESC to abort.

41E