Casio Printer CW-75 Error Messages, Message, Message, Cause and Recommended Action, Cause and Recommended Action

Error Messages

Message	Cause and Recommended Action
LOW BATTERY!	Battery power is low.
CONTINUE TO	➔ Replace batteries as soon as possible.
PRINT? SET/ESC
LOW BATTERY!	Battery power is low.
	➔ Replace batteries as soon as possible.
DATA ERROR!	You are attempting to use the printer without
INITIALIZE THE	initializing its memory.
PRINTER!	➔ Initialize memory immediately.
PRINT ERROR!	You are attempting to print without an ink ribbon
LOAD AN INK	cassette loaded in the printer, or the cassette is not
RIBBON CAS-	loaded correctly.
SETTE!	➔ Correctly load the ink ribbon cassette.
PRINT ERROR!	The loaded ink ribbon cassette has reached its end.
NO INK RIBBON!	➔ Replace it with another ink ribbon cassette.
NOT ENOUGH INK	There is not enough ink ribbon to completely print
RIBBON FOR	the label you are trying to print.
NEXT PRINT	➔ Replace it with another ink ribbon cassette.
PRINT ERROR!	You are attempting to print without a disc on the disc
LOAD A DISC	tray.
INTO THE	➔ Correctly place a disc onto the tray.
PRINTER!
NO DATA!	You are attempting to recall, edit, or delete a preset
	phrase memory that does not contain any data.
	➔ Select the correct preset phrase memory.
	You are attempting to recall or delete stored label data
	when none exists.
	➔ Save label data before trying to recall it.

Message	Cause and Recommended Action
ENTIRE PHRASE	The number of characters in the preset phrase you
COULD NOT BE	recalled will cause the number of allowable
RECALLED!	characters to be exceeded. In this case, the phrase
	will be recalled only up to the allowable number of
	characters.
	➔ You can use the recalled characters, or reduce the
	number of characters in the label in order to allow
	recall of the entire preset phrase.
NO INPUT TEXT!	The label you are attempting to print or preview does
	not contain any input text.
	➔ Select a different label or input text.
SAME NAME	The name you are trying to use to save a label is
ALREADY USED!	already used for an existing label in memory.
	➔ Use a different name.
LINK ERROR!	Data could not be received from the connected
CHECK ALL	computer.
CONNECTIONS!	➔ Check all connections and make sure you are
	performing the required operations correctly.
MEMORY FULL!	There is not enough memory to store the data you
	are trying to save.
	➔ Delete some of the data from memory to make
	room from the new data.

E62