Power Supply
You can power this digital piano by plugging it into a standard household power outlet.
Be sure you turn off power and unplug the power cord from the electrical outlet whenever the digital piano is not in use.
Using the AC Adaptor
Make sure that you use only the AC adaptor specified for this digital piano.
Specified AC Adaptor:
[Bottom]
DC 12V jack
AC adaptor
AC outlet
Also note the following important warnings and precautions when using the AC adaptor.
WARNING
Misuse of the AC adaptor creates the risk of fire and electric shock. Always make sure you observe the following precautions.
• Be sure to use only the AC adaptor that is specified for this product.
•Use only a power source whose voltage is within the rating marked on the AC adaptor.
•Do not overload electrical outlets and extension cords.
•Never place heavy objects on the cord or subject it to heat.
•Never try to modify the cord or subject it to excessive bending.
•Never twist or stretch the cord.
•Should the electric cord or plug become damaged, contact your original retailer or authorized CASIO
Service Provider.
• Never touch the AC adaptor while your hands are wet.
Doing so creates the risk of electric shock.
CAUTION
Misuse of the AC adaptor creates the risk of fire and electric shock. Always make sure you observe the following precautions.
•Do not locate the electric cord near a stove or other sources of heat.
•Never pull on the cord when unplugging from the
electrical outlet. Always grasp the AC adaptor when unplugging.
• Insert the AC adaptor into the wall outlet as far as it will go.
•Unplug the AC adaptor from the wall outlet during lightening storms or before leaving on a trip or other
•At least once a year, unplug the AC adaptor from the wall outlet and wipe away any dust that is built up in the area around the prongs of the plug.
IMPORTANT!
•Make sure that the product is turned off before connecting or disconnecting the AC adaptor.
•Using the AC adaptor for a long time can cause it to become warm to the touch. This is normal and does not indicate malfunction.
Using the Cable Clip
After connecting the AC adaptor and pedal (page
•To fasten the clip
As shown in Figure 1, press down on (a) to force the tip of the clip into the slot. Press down until you hear the clip click securely into place.
Figure 1
(a)
•To release the clip
As shown in Figure 2, press (b) in the direction indicated by the arrow.
(b)
Figure 2
| ||
PS3000_e_08_15.p65 | 10 | 03.10.22, 3:19 PM |