MIDI Data Format
Brightness ★
Format
Byte 1 | Byte 2 | Byte 3 |
|
|
|
BnH | 4AH | vvH |
n ....... Voice Channel Number = 0H to FH (Ch1 to Ch16)
vv .... Filter Cutoff Frequency = 00H to 7FH
Portamento Control ★
Format
Byte 1 | Byte 2 | Byte 3 |
|
|
|
BnH | 5AH | vvH |
n ....... Voice Channel Number = 0H to FH (Ch1 to Ch16)
kk .... Source Note Number = 00H to 7FH
Effect 1 Depth (Reverb Send Level)
Format
Byte 1 | Byte 2 | Byte 3 |
|
|
|
BnH | 5BH | vvH |
n ....... Voice Channel Number = 0H to FH (Ch1 to Ch16)
vv .... Reverb Send Level = 00H to 7FH
Effect 3 Depth (Chorus Send Level)
Format
Byte 1 | Byte 2 | Byte 3 |
|
|
|
BnH | 5DH | vvH |
n ....... Voice Channel Number = 0H to FH (Ch1 to Ch16)
vv .... Chorus Send Level = 00H to 7FH
NRPN
With the instrument, NRPN are defined as tone editing parameters and drawbar parameters. The MSB and LSB of an NRPN specify the parameter being controlled, while the specified parameter’s value is set in accordance with the subsequent data entry.
The following table shows the relationship between parameters and NRPN as defined by the instrument.
NRPN MSB | NRPN LSB | Parameter |
|
|
|
01H | 08H | Vibrato Rate |
|
|
|
01H | 09H | Vibrato Depth |
|
|
|
01H | 0AH | Vibrato Delay |
|
|
|
01H | 20H | TVF Cut Off Frequency |
|
|
|
01H | 21H | TVF Resonance |
|
|
|
01H | 63H | TVF/TVA Envelope Attack Time |
|
|
|
01H | 64H | TVF/TVA Envelope Decay Time |
|
|
|
01H | 66H | TVF/TVA Envelope Release Time |
|
|
|
See “Vibrato Rate” through “TVF/TVA Envelope Release Time” for the data entry MSB value range and other details.
Format
Byte 1 | Byte 2 | Byte 3 |
|
|
|
BnH | 63H | pmH (MSB) |
|
|
|
BnH | 62H | plH (LSB) |
n ....... Voice Channel Number = 0H to FH (Ch1 to Ch16)
pm ... MSB of NRPN pl ..... LSB of NRPN
Recognition
•NRPN messages not defined by the instrument can also be received, but subsequent data entry values after undefined NRPN messages are ignored.
•After the NRPN MSB and LSB are received and the applicable control parameters settings are made, the value is set by receipt of the MSB of the subsequent data entry. The data entry LSB is ignored.
Vibrato Rate
NRPN MSB = 01H
NRPN LSB = 08H
Data Entry MSB = mmH
mm .. Vibrato Rate = 00H to 40H to 7FH
Recognition
When the instrument receives this message, the preset Vibrato Rate value for the tone is changed to the Vibrato Rate value that corresponds to the data entry MSB of the received message. There is no change when the value of the data entry MSB is 40H(0).
Vibrato Depth
NRPN MSB = 01H
NRPN LSB = 09H
Data Entry MSB = mmH
mm.. Vibrato Depth = 00H to 40H to 7FH
Recognition
When the instrument receives this message, the preset Vibrato Depth value for the tone is changed to the value that corresponds to the data entry MSB of the received message. There is no change when the value of the data entry MSB is 40H(0).
Vibrato Delay
NRPN MSB = 01H
NRPN LSB = 0AH
Data Entry MSB = mmH
mm .. Vibrato Delay = 00H to 40H to 7FH
Recognition
When the instrument receives this message, the preset Vibrato Delay value for the tone is changed to the value that corresponds to the data entry MSB of the received message. There is no change when the value of the data entry MSB is 40H(0).
| ||
PS3000_e_MIDI Data.p65 | 4 | 03.10.8, 2:22 PM |