Connections

Bottom

Headphones

SP-20

IMPORTANT!

•Whenever connecting external equipment, first set the VOLUME knob of the digital piano and the volume controller of the external equipment to relatively low volume settings. You can later adjust volume to the level you want after connections are complete.

•Be sure also to refer to the documentation that comes with the external equipment for its proper connection procedures.

Connecting Headphones 1

Connect commercially available headphones to the digital piano’s headphones jack. This cuts off the built-in speakers, which means you can practice even late at night without disturbing others. To protect your hearing, make sure that you do not set the volume level too high when using headphones.

Connecting to a PEDAL Jack 2

Depending on the type of operation you want the pedal (SP-

20)to perform, connect the pedal’s cable to the digital piano’s DAMPER jack or SOFT/SOSTENUTO jack. If you want to use both jacks at the same time, you need to purchase another optionally available SP-20 pedal.

See “Using the Pedals” on page E-14 for information about using a pedal.

Accessories and Options

Use only the accessories and options specified for this digital piano. Use of non-authorized items creates the danger of fire, electric shock, and personal injury.

417A-E-013A

 

E-11

PS3000_e_08_15.p65

11

03.10.8, 2:22 PM