Assembly Instructions
Protecting the Piano Against Tipping
Over
Locating the piano against a wall is normally enough to protect it against tipping over. If you need to locate it away from a wall, be sure to perform the following steps in order to ensure that it is secure.
1.Remove the metal pieces at the bottom of side panels A and B.
2.Repositioning the metal pieces so they are facing outwards reinstall them onto the side panels (Figure 7).
•If you have trouble inserting the bolts that come pre- installed in the side panels into the joint connector screw
holes, use a screwdriver to rotate the joint connector so the bolts can enter the holes (★ in Figure 7).
Figure 7
Side panel
Attaching the AC Adaptor and
Pedal to the Piano
After assembling the stand, connect the AC adaptor and pedal to the bottom of the piano. For details, see “Power Supply” on page
| ||
PS3000_e_26_31.p65 | 29 | 03.10.8, 2:22 PM |