Recording Your Keyboard Play

■Supported Track Data

The following describes the data that can be recorded to each type of track.

System Track, Tracks 01 through 16

Keyboard notes, keyboard tone setting (main), pedal and pitch bend wheel operation

System Track only

Layer, split, octave shift, reverb, chorus, keyboard temperament, tempo, Auto Accompaniment play, auto harmonize, one-touch preset, Music Preset,*1 registration*1*2

*1 Recall only

*2 The Auto Accompaniment volume level and transpose setting of the recalled data is not included in the recording.

1. Record the first part to the system track.

•Use the procedure under “Recording or Playing Back a Single Song” (page E-34) or “Recording or Playing Back Multiple Songs” (page E-35) to record to the system track.

2.Use the (RECORDER) button to cycle through the recorder modes until the RECORDER lamp is flashing (record mode).

Flashing: Record mode

3. While holding down the  (FUNCTION) button, press the (RECORDER) button.

This displays the track selection screen.

Use the  (w, q) button to select the track you want to record next (T01 through T16).

After selecting a track, press the  (EXIT) button to exit the track selection screen.

Track Name

Display

System Track

Sys

 

 

 

Tracks 01 through 16

T01 through T16

 

 

 

 

 

 

 

 

 

4. Select the tone of the part you want to record to the track.

5. Press the (START/STOP) button.

This will start playback of what you recorded to the system track and start recording to the currently selected track. Play what you want to record to the current track along with the playback from the system track.

6. To stop recording, press the (START/ STOP) button again.

This enters the playback mode. Press the (START/ STOP) button again to play back the track you just recorded. Each press of (START/STOP) starts and stops playback.

•You can use the following procedure to turn specific tracks on (play enabled) and off (play disabled). This allows you to listen only to the track(s) you want when recording a new track.

(1)While holding down the  (FUNCTION) button, press the (RECORDER) button. This displays the song selection screen.

(2)Press the  (i) button once.

This displays the track on/off screen.

(3)Use the  (w, q) buttons to select the track you want, and then press the  (ENTER) button to toggle it on or off.

7.Repeat steps 2 through 6 as required to record all of the tracks you want.

E-36