Using Built-in Tones

Adding Reverb to the Tone

1. Press the  (REVERB) button to toggle reverb on and off.

Lit when on

Selecting the Reverb Type

You can select from among the following four types of reverb.

1:Room

2:Hall

3:Large Hall

4:Stadium

1. Hold down the  (REVERB) button until the reverb type selection screen shown below appears on the display.

2. Use the  (w, q) buttons to select the reverb type you want.

3. Press the  (REVERB) button to exit the reverb type screen.

Adding the Chorus Effect to the Tone

1. Press the  (CHORUS) button to toggle chorus (which adds depth to a tone) on and off.

Lit when on

Selecting the Chorus Type

You can select from among the following four chorus types.

1:LightChorus

2:Chorus

3:Deep Chorus

4:Flanger

1. Hold down the  (CHORUS) button until the chorus type selection screen shown below appears on the display.

2. Use the  (w, q) buttons to select the chorus type you want.

3. Press the  (CHORUS) button to exit the chorus type screen.

English

E-13