Music Presets

2. Use the bp (REW) and bq (FF) buttons to move the cursor (2) on the chord progression editing screen to the step you want to select.

3. Change the content of the selected step as desired.

3-1.Select a chord fingering mode and use the chord keyboard (page E-19) to input chords.

Fingering a chord causes the cursor (2) to move to the next step automatically.

•If you want to advance to the next step without changing the current chord, press the br (PAUSE) button.

•If (3) Resolution is shorter than the time up to the next step, a new step (without chord) that is equal to the time of the resolution will be inserted temporarily into the Music Preset. Fingering a chord for the new step will cause the step to be registered as part

of the Music Preset, and the cursor will advance to the next step.* You can use this operation to insert a new step between the current and following step.

*Using the bp (REW) and bq (FF) buttons to move the cursor without inputting a chord will delete the temporarily inserted step.

3-2.Use the ct (w, q) buttons to change the step timing (measure:beat:tick).

Each press of either button changing the timing in accordance with the resolution.

•The range of values you can specify for the step timing is limited by the steps before and after the current step.

•The timing of the first step (001:1:00) is fixed and cannot be changed. Also, the final step is always one measure, regardless of the resolution.

Last step

3-3.To delete a step, press both of the ct (w and q) buttons at the same time.

•You cannot delete the first step or the last step.

4. Repeat the above steps to edit all of the steps you want.

•You can playback the Music Preset you are currently editing by pressing the bs (START/STOP) button.

•The table below describes other Music Preset editing

operations you can perform. Press the cs (FUNCTION) button, use the dn (u) and do (i) buttons to select the editing operation you want, perform the required operation, and then press the dp (ENTER) button to apply the edit and return to the chord progression editing screen.

•To exit the editing operation and discard all of your edits, press the dm (EXIT) button.

 

Editing

 

 

 

Operation

Description

Operation

 

(Display)

 

 

 

 

Initializes all steps.

 

 

 

Initialization is useful

 

1

Initialize

when you want to create

–

(Initialize)

a totally new chord

 

 

 

 

progression from

 

 

 

scratch.

 

 

 

 

 

 

 

Changes the pitch (key)

Use the ct (w, q)

 

Change Key

of the chords in all of the

buttons to select the

2

steps in semitone units.

amount of change

(Change Key)

 

 

 

you want (–5 to 6

 

 

 

semitones).

 

 

 

 

 

Append

Copies all of the steps of

Use the ct (w, q)

 

another Music Preset to

buttons to select the

 

Music Preset

3

the end of the current

number∗ of the

 

(Append

Music Preset.

Music Preset you

 

Chords)

 

 

want to add.

 

 

 

 

 

 

 

 

Delete

Deletes a specified

Use the ct (w, q)

4

Measures

number of measures

buttons to select the

(DELETE

from the current cursor

measures.

 

 

Measure)

step forward.

 

 

 

 

 

 

Insert

Inserts a blank measure

 

5

Measure

at the currently selected

–

(INSERT

step.

 

 

 

1Measure)

 

 

 

 

 

 

*The Music Presets in groups 2, 3, and 4 are numbered sequentially, following the numbers in group 1, which start with 1. For details about sequential numbers, see the “Music Preset List” on page A-7.

5. After all editing operations are complete, press the dm (EXIT) button to return to the editing operation selection screen (page E-29).

NOTE

•A single preset can contain up to approximately 2,000 chords. If your edits cause the chord limit to be exceeded, the message “Memory Full” will appear on the display and further editing will become impossible.

English

E-31