Other Settings

You can use the settings in this section to adjust the tuning and touch of the keyboard, to configure pedal and MIDI settings, and to configure other parameters in order to tailor Digital Piano operation to your particular needs.

Configuring Settings

1. Press the cs (FUNCTION) button.

The FUNCTION lamp will light and the function screen will appear on the display. (See table below.)

Parameter or group

Setting

2. Use the dn (u) and do (i) buttons to select one of the parameters (1 through 8) shown in the table below.

Parameters 4 through 8 actually are parameter

groups. After selecting a group, press the dp (ENTER) button, and then use buttons dn (u) and do (i) to select the parameter you want.

Short cut buttons also are available for accessing a parameter directly after you press the cs (FUNCTION) button, without going through the menu. See the “Shortcut Button” column in the table below for the applicable shortcut button of each parameter.

3.Use the ct (w, q) buttons to change the setting of the currently selected parameter.

To return to the function screen, press the dm (EXIT) or cs (FUNCTION) button.

cs ct

dn do

NOTE

Holding down the cs (FUNCTION) button while you press the ct (w, q) buttons in step 3 will scroll the setting in steps of 10.

You also can use the cs (FUNCTION) button for faster scrolling while changing the tone number, rhythm number, and other scrollable settings.

Keep the cs (FUNCTION) button depressed while pressing a ct (w, q) button for high- speed scrolling. Releasing the cs (FUNCTION) button first can result in another unintended setting being changed.

English

E-43