Recording Your Keyboard Play
2. Press the ds (AUDIO RECORDER) button as many times as necessary until its lamp starts to flash (which indicates audio recording standby).
•The first press of the ds (AUDIO RECORDER) button may cause the message “Media Mounting” to appear on the Digital Piano display. If this happens, wait until the display returns to normal. After that, press the ds (AUDIO RECORDER) button again until its lamp starts to flash.
3. Press the bs (PLAY/STOP) button.
•This will start playback of the current song memory contents. Play along on the Digital Piano.
4.To stop recording, press the ds (AUDIO RECORDER) button.
•The AUDIO RECORDER button lamp will flash for a short while after you press it, and then it will stop flashing and remain lit to let you know that audio recording is complete. Do not perform the operations below while the button is flashing.
•To continue with audio recording, press the ds (AUDIO RECORDER) button so its lamp flashes. To exit audio recording, press the ds (AUDIO RECORDER) button twice so its lamp goes out.
Playing Back Data Recorded on a USB Flash Drive
1. Press the ds (AUDIO RECORDER) button.
•The above step is not necessary if you want to play back recorded data immediately after recording it (because the AUDIO RECORDER button lamp is already lit).
•This causes the AUDIO RECORDER button lamp to light.
2. While holding down the cs (FUNCTION) button, press the ds (AUDIO RECORDER) button.
This will display the audio file selection screen.
3. Use the ct (w, q) buttons to select a song.
•The ct (w) button scrolls through the recorded songs in order from the newest (most recently recorded) to the oldest.
•The ct (q) button scrolls from the old to the new.
4. Press the dm (EXIT) button.
5. Press the bs (PLAY/STOP) button.
6. To stop a song, press the bs (PLAY/STOP) button again.
•To exit the Audio Recorder, press the ds (AUDIO RECORDER) button. This will cause the lamp above the AUDIO RECORDER button to go out.
Deleting an Audio File from a USB Flash Drive
Files can be deleted one at a time.
IMPORTANT!
•The procedure below deletes all of the data of the selected track. Note that the delete operation cannot be undone. Check to make sure you really do not need the data in Digital Piano memory before you perform the following steps.
1. Press the ds (AUDIO RECORDER) button.
•This will cause the AUDIO RECORDER button lamp to light.
2.While holding down the cs (FUNCTION) button, press the ds (AUDIO RECORDER) button.
This will display the audio file selection screen.
3. Use the ct (w, q) buttons to select the song you want to delete.
•The ct (w) button scrolls through the recorded songs in order from the newest (most recently recorded) to the oldest.
•The ct (q) button scrolls from the old to the new.
4.Hold down the ds (AUDIO RECORDER) button until the message “Sure?” appears on the display.
5.To delete the data, press the ct (YES) button.
This will delete the Audio Recorder data you selected.
•To cancel the delete operation, press the ct (NO) button.
NOTE
•The file number of file you delete remains unused. Recording a new file will cause the file number that comes after the last file recorded to the USB flash drive.
| B | |
|
|