Recording Your Keyboard Play
Deleting a Particular Track
1. Perform steps 1 through 3 of the procedure under “Deleting a Recorder Song” to select the recorder song that contains the track you want to delete.
2. Press the do (i) button.
This displays the track selection screen.
3. Use the ct (w, q) buttons to select the track you want to delete.
4. Hold down the 4 (SONG RECORDER) button until the message “Sure?” appears on the display.
5. Press the ct (YES) button to delete the track.
•To cancel the delete operation, press the ct (NO) button.
Re-recording Part of a
Recorder Song
(Punch-in Recording)
You can use
Mistake
Playback
Use
recording to
only this part.
1. Enter the Song Recorder record mode and select the track that contains the section you want to
•See step 3 under “Recording to a Specific Track (Part)” (page
2.Hold down the 4 (SONG RECORDER) button until the
3. Press the bs (START/STOP) button.
This will start playback of the selected track.
4. When playback reaches the point you want to
This automatically starts
•Any one of the following also will start
recording: a pedal or pitch bend wheel operation; pressing the 4 (SONG RECORDER) button;*1
changing the tone setting; changing the rhythm, or tempo setting*2
*1 Press 4 (SONG RECORDER) when you want to start
*2 System track only
•You can perform bp (REW), bq (FF), and br (PAUSE) button operations during
5.To stop
(START/STOP) button again.
Anything in the track following the point where you pressed the bs (START/STOP) button will be retained
•If you want to delete all of the data in the track following the section you
•If you want to cancel
English