Assembling the Stand

8. After ensuring that all of the screws are fully tightened, remove the packing material and stand up the stand.

•After standing up the stand, cover each of the eight screws you have installed up to this point with screw caps E.

9.Attach the brackets I to the pedal unit F, and temporarily secure them with screws G.

G

G

I-(b)

F

I-(a)

If you plan to locate the digital piano against a wall, proceed to step 10 on page E-31.

10. Remove the screws that hold the corner brackets in place on the back corners (the corners away from the pianist) of the side panels.

BA

11. As shown in the illustration, reverse the corner brackets you removed in step 10, and insert pedal unit brackets I-(a)and I-(b)between the each of the corner brackets and the side panels A and B.

B

I-(b)

A

I-(a)

*WARNING

•The corner brackets help to prevent the stand from tipping over. Whenever the stand is in a location that is not up against a wall, reorient the corner brackets as shown in the illustration. Leaving the corner brackets in their original orientations can make it easy for the stand to tip over towards the back, creating the risk of personal injury.

12. Securely tighten the screws G that you temporarily tightened in step 9.

• Cover the screw heads with the caps J.

J

G

E-30