Assembling the Stand

12. Securely tighten the screws G that you temporarily tightened in step 9.

• Cover the screw heads with the caps J.

J

G

13. Tighten the screws you loosened in step 10 to secure the corner brackets to the side panels.

IMPORTANT!

Press down on the edges of the pedal unit as you tighten the corner bracket screws.

To connect the cable

1. Making sure that the pedal unit cable plug is oriented as shown in the illustration below, plug it into the pedal connector on the bottom of the digital piano.

Press the plug fully into the connector as far as it will go.

Use the clips H to secure the pedal cable to two locations on side panel B.

H

To install the music stand

1. Slide the music stand under the two bolts on the top of the digital piano as shown in the illustration and then tighten the bolts.

E-32