Casio QV-700 To superimpose a title on an image, To record the title, the, the, • If, step, Note, back, Notes, title, • The, levels, Operation, Important, Important

			Playing Back Images		Operation
Notes				5.		Press the shutter button.
• If	the page number is displayed in the	upper right corner of the				• The title is recorded at the brightness level you specified in
screen when you perform a zoom operation, the number is replaced
						step 4.
by a zoom area indicator (			). This indicator shows you what part
of the image is currently enlarged on the display. You can turn the					Important!
zoom area indicator on and off by pressing the DISP button.					Recording a title causes anything that was previously recorded to be
• Note that turning display of the zoom area indicator on and off also
					deleted.
affects the playback image data display (page 52) and the record
mode image data display (page 39).					Note
					The title can be inserted in the area defined by the outer line of the
Superimposing a Title on an Image					frame.
With this camera you can record a title and then superimpose the
title onto another image. Note that you have to prepare a paper					To superimpose a title on an image
copy of your title before performing the following procedure.
To record the title					Important!
					• You cannot superimpose a title on the image while memory is full
1.	Slide the function switch to the REC position.				(indicated by the “Memory Full” message).
					• You cannot superimpose a title on a rotated image (page 61).
2. Align the Dial with		to select TITLE.
					• The recording date of an image remains as that when the image
	• You can use [+] and [–] to perform exposure compensation				was recorded, even if you superimpose a title on the image.
	(page 37).			1.		Slide the Function switch to the PLAY position.
3. Align the frame with the title you want to record and press
					2. Use the [+] and [–] buttons to scroll through the images in
	the shutter button.
						memory until the one you want to superimpose a title onto
4. Use [+] and [–] to adjust brightness within a range of				± 30
						is on the monitor screen.
	levels.

5758

	Playing Back Images	Operation
3.	Press the MENU button.	8. Press the shutter button to register the selected plate.
		• If you selected “No Plate” in step 7, skip to step 11 here.
		Otherwise, proceed with step 9.
		9. Use the [+] and [–] buttons to select the color of the plate.
4. Use the [+] and [–] buttons to select the “TITLE” item and		• Each press of [+] cycles forward
		through the plate colors, while [–]
	press the shutter button.	cycles back.
	• TITLE is located in MENU 2.	• There are 12 plate color patterns.
		10 . Press the shutter button to register the selected color.
		11 . Use the [+] and [–] buttons to specify the location of the
5.	Use the [+] and [–] buttons to select the color of the title.	title.
		• Each press of [+] cycles forward
	• Each press of [+] cycles forward through the colors, while [–]
		through the locations of the titles,
	cycles back.	while [–] cycles back.
	• There are 10 title color patterns and 10 highlight patterns.	• There are 5 locations.
6.Press the shutter button to register the selected color.
7.	Use the [+] and [–] buttons to select a plate for the title.	12 . Press the shutter button to register the selected position.
	• Each press of [+] cycles forward
		• The	image	with the superimposed	title is stored	in	the
	through the plates, while [–] cycles
		memory	page	immediately following	the memory page
	back.
		where	the original image is stored. All images			in	the
	• There are 7 plates and No Plate.
		following memory pages are shifted to make room.

5960