Casio QV-700 Connecting to Other Devices, Television, Video Tape Deck, To record camera images on video tape, and, page, cable, camera, device, memory, title as, terminal

Connecting to Other DevicesUsing the Camera with a Connected Device				UsingUsingthe Camerathe Camerawith a ConnectedwithDevicea Connected Device
The camera terminals				The following section provides specific information on how you can
The following describes which the camera terminal you should use				use the camera after connecting to various types of devices. In each
				case, the camera terminal you should connect to is indicated in the
for each type of connection.
for each type of connection.				title as	VIDEO	and	DIGITAL .
VIDEO OUT –		Use this terminal when connecting to the VIDEO IN		title as	VIDEO	and	DIGITAL .
VIDEO OUT –		Use this terminal when connecting to the VIDEO IN
		terminal of a TV, video tape deck, video printer, or		Important!
		other	similar devices. Use the special video cable	• Make sure that the power of all devices is turned off before connect-
		that comes with the camera for such connections.
		that comes with the camera for such connections.		ing them.
				ing them.
INPUT				• You should also check the owner’s manuals of the device you are
			VIDEO OUT
L	R	VIDEO	VIDEO OUT	connecting to the camera for precautions and other information.
AUDIO			terminal
			terminal
			Special video	Television
VIDEO IN			cable that	Television		VIDEO
terminal of other			comes with	Use the special video cable that comes with the camera to connect it
terminal of other			camera
device			camera	to a television, and you can then view the images stored in camera
				memory on the TV’s screen.
DIGITAL –	Use this terminal to connect to a personal computer (re-			Important!
	quires optional Connection Kit), another CASIO Digital			• The camera can be connected only to a TV that is equipped with a
	Camera, or a QV Color Printer. The illustration below			VIDEO IN terminal.
	shows how to connect to another digital camera.			• Make sure that the power of both the camera and the TV are turned

DIGITAL terminal			DIGITAL terminal*	off when making connections.
			DIGITAL terminal*	• The signal output through this camera's VIDEO OUT terminal is an
			Connecting
			Connecting	NTSC signal. An image output through this terminal will not look
			cable*	normal if the camera is connected to a PAL or other type of TV or
				video deck.
				• Leaving the same image displayed on a TV or computer CRT
				screen for very long periods can cause that image to “burn in”, leav-
				ing a ghost of the image even after the original image is cleared. Be
				sure not to leave an image on a TV or CRT screen for long periods.

*The type of connecting cable you should use depends on the type and shape of the terminals equipped on the digital camera you are connecting to. See pages 81 through 88 for details.

8182

Using the Camera with a Connected Device		Using the Camera with a Connected Device
Accessory video cable		• Indicators or symbols (page 39) are also recorded on the video tape
TV	VIDEO OUT	if they are turned on. Be sure to turn off display of remaining pages
	terminal	if you do not want them in the taped images.
	INPUT	• If the low battery indicator (page 25) is displayed while you are re-
L	R VIDEO	cording to video tape, it will also be recorded with the image. If this
		happens, either replace batteries or use the AC adaptor.
	AUDIO
	VIDEO IN terminal	Video Printer	VIDEO
After connecting the camera and TV, set the channel
		You can use Video	Printer to print copies of images in camera
of the TV to the channel used for video input.
		memory.
After connecting the camera and TV, use the same procedures as

those described under “Displaying Images on the Camera’s LCD” on		To print camera images on a Video Printer
page 51.		1. Use the special video cable that comes with the camera to connect

		to the VIDEO IN terminal of the video printer.
Video Tape Deck	VIDEO	2. Set up the video printer to print images input through its VIDEO IN
		terminal.
You can use the video tape deck to record images from the camera.
		• Consult the owner’s guide that comes with the video printer for de-

To record camera images on video tape		tails about how to set up for printing.
		3. Enter the camera Playback Mode and display the image you want
1. Use the special video cable that comes with the camera to connect
		to print.
to the VIDEO IN terminal of the video tape deck.
		4. Start the video printer’s print operation.
2. Set up the video tape deck to record images input through its
		• Indicators or symbols (page 39) are also included on the print if they
VIDEO IN terminal.
• Consult the owner’s guide that comes with the tape deck for details		are turned on. Be sure to turn off display of remaining pages if you
		do not want them in the print.
about how to set up for recording.
		• If the low battery indicator (page 25) is displayed while you are print-
3. Enter the camera Playback Mode and start the video deck record
		ing, it will also be printed with the image. If this happens, either re-
operation.
		place batteries or use the AC adaptor.

•It is probably best to use auto play when recording camera images to video tape, because it changes pages automatically at a preset speed.

8384