Casio QV-700 Bottom, Dial, Using the Soft Case, Connecting the Wrist Strap, Monitor Screen, Playback Mode

			General Guide	Getting Acquainted
Bottom			Tripod hole	Monitor Screen
			Battery	Recording Mode
			compartment				Recording Mode
			lock
							(Not normally displayed
		Battery compartment cover
							during image recording.)
BRIGHT (brightness) control
• BRIGHT control adjusts the brightness of the image on the LCD.				Manual recording			Remaining number
The brightness is set at the factory to the optimum setting, and nor-				indicator
							of pages
mally does not need adjustment.
				Macro indicator
								Mode
Dial				(appears when	the
									(FINE)
					switch
									(NORMAL)
	Normal Recording ....... For normal photography (page 31)			is set to	).
	Repeat Recording ....... For recording of a sequential series								(ECONOMY)
		of shots (page 42)							Folder name
	Timer Recording ......... For image recording using the timer
		(page 45)		Flash Mode
	Title Recording ............ For recording of an image with a title			Auto	None
				Flash On
		(page 57)						Date and time
				Flash Off				(date and time of
	Panorama Recording .. For recording of a panoramic image
								recording)
		(page 48)
							EV shift
	Self-timer Recording ...	For image recording using the self-
						Battery capacity
		timer (page 44)

1314

	General Guide	Memory Cards
Playback Mode		This camera uses a memory card (COMPACTFLASH cards) for im-
Pages	Mode	age memory, and a memory card is loaded in the camera when you
		purchase it.
	(FINE)
Protect indicator	(NORMAL)	Important!
	(ECONOMY)
		• Make sure that the power of the camera is turned off before you
	Folder name	insert or remove a memory card.
		• When inserting a memory card into the camera, make sure that the
		card is oriented correctly. Make sure that the correct side of the card
		is facing up, and that you insert the correct end of the card into the
Battery capacity	Date and time	camera.
	(date and time of recording)
		To insert a memory card into the camera
		1. Open the memory card slot cover.
Connecting the Wrist Strap		2. As shown in the illustration, slide the memory card into the
Pass the wrist strap through the hole on		slot and push it in as far as it will go.
		3. While pulling the eject button, fold it into the camera.
the side of the camera as shown in the
illustration.		• Do not try to force the eject button into the camera without
Important!			pulling it. Doing so can result in damage to the eject button.
		4. Close the memory card slot cover.
Be sure to keep the wrist strap around
your wrist whenever using the camera to		1.	2.	3.	4.
protect against accidentally dropping it.
			Arrow
Using the Soft Case
Keep the camera in its soft case to pro-
tect it when not in use.
			Surface marked	Eject button
			with arrow
	15	16