Power Supply

Getting Acquainted

Low Battery Indicator

 

Using AC Power

The low battery indicator (

) appears in the center of the LCD

To power the camera from standard AC power, use the optional AC

whenever batteries are about to go dead. It tells you that power will

adaptor (AD-C620).

soon turn off automatically if you continue using the camera without

 

replacing batteries. Be sure to replace all four batteries with a fresh

AC power terminal

set of new ones.

 

AC adaptor

Auto Power Off

 

 

Power automatically turns off whenever you do not perform any cam-

 

era operation for a period of time. Power turns off after about two

 

minutes in the Record Mode or after about five minutes in the Play-

 

back Mode.

 

AC outlet

 

 

•To restore power, simply slide the POWER switch to the right as you normally do.

DEL

 

AC Adaptor precautions

 

POWER

 

• Never use an electrical outlet whose

ON/OFF

 

 

voltage is outside the rating marked

 

 

 

 

on the camera. Doing so can create

 

 

the danger of fire or electrical shock.

Important!

 

Use only the optional AC adaptor

Caution

specified for this camera.

 

The Auto Power Off function does not operate under the following

• Should the cord of the AC adaptor

 

conditions.

 

become damaged (exposed internal

• During Auto Play (page 65)

 

wiring or shorts), request a replace-

• When operations are being performed on a computer connected to

 

ment from an authorized CASIO

 

service provider. A

damaged AC

the camera via the camera’s DIGITAL terminal.

 

 

adaptor cord creates the

danger of

• Whenever the AC adaptor is connected to the camera.

 

 

fire or electrical shock.

 

 

 

 

2526

 

 

 

Power Supply

 

GettingSettingAcquaintedthe Current Date and Time

 

 

•

Always be sure to use the AD-C620

Use the following procedures to set the current date and time, and to

 

 

 

 

AC adaptor only. Using any other AC

select the date format.

 

 

adaptor can cause damage to the

Important!

 

 

camera not covered by the warranty.

 

Caution

•

When unplugging the AC adaptor

No date and time data is registered for recorded images unless you

 

from the wall socket, be sure to

use the procedure below to set the current date and time.

 

 

grasp the adaptor (not the cord).

 

 

 

 

 

•

Avoid an undue bending, pulling,

To set the date and time

 

 

and twisting of the AC adaptor's

1.

 

 

 

cord, and never try to lengthen the

Slide the function switch to the PLAY position.

 

 

cord by splicing it with other wire.

2.

Press MENU.

•

Be sure to switch power off before connecting or disconnecting the

 

 

• When there are no images on the

adaptor.

 

 

 

 

memory card, the display shows

•

Always turn camera power off before disconnecting the AC adaptor,

 

 

MENU in place of MENU 1.

even if the camera has batteries installed. If you don't, the camera

 

 

 

will turn off automatically when you disconnect the AC adaptor.

 

 

 

Even so, you run the risk of damaging the camera whenever you

 

 

 

disconnect the AC adaptor without first turning power off.

 

3. Use [+] and [–] to select ADJUST, and then press the shut-

•

The AC adaptor may become warm to the touch after extended pe-

 

riods of use. This is normal and is not cause for alarm.

 

 

ter button.

•

After use turn off the power switch of the camera and unplug adap-

 

 

• ADJUST is located in MENU 4.

tor from the AC outlet.

 

 

 

 

 

2728