76
OTHER RECORDING FUNCTIONS
IMPORTANT!
•Setups that you register as Best Shot sample scenes
are located after the built-in sample scenes.
•When a Best Shot user setup is recalled, the monitor
screen in step 4 of the procedure on page 74
displays the text “Recall User Scene”.
•Note that formatting the built-in memory (page 128)
deletes all Best Shot user setups.
NOTES
•The following are the settings that are included in a
Best Shot user setup: focus mode, EV shift value,
filter, metering mode, white balance mode, flash
intensity, sharpness, saturation, contrast, flash
mode, and ISO sensitivity.
•Note that images recorded with this camera only can
be used to create a Best Shot user setup.
•You can have up to 999 Best Shot user setups in the
camera’s built-in memory at one time.
•You can check the current setup of a scene by
displaying the various setting menus.
•User setups are assigned file names using the format
“UQR40nnn.jpe” (where n = 0 to 9).
■ To delete a Best Shot user setup
1.
In the REC mode, press [MENU].
2.
Select the “REC” tab, select “REC Mode”, and
then press [].
3.
Use [] and [] to select “ (Best Shot)”,
and then press [SET].
•This enters the Best Shot mode and displays a
sample scene.
4.
Use [] and [] to display the user setup you
want to delete.
5.
Press [] ( ) to delete the user setup.
•You can also delete a user setup by using your
computer to delete its file in the “SCENE” folder in
the camera’s built-in memory (page 146).