Casio QV-R40 manual Specifying the Auto Focus Area, Other Recording Functions

OTHER RECORDING FUNCTIONS

When you see this:	It means this:
Green focus frame	The image is focused.
Green operation lamp
Red focus frame	The image is not in
Flashing green operation lamp	focus.

3.Press the shutter release button the rest of the way to record the image.

■Specifying the Auto Focus Area

You can use the following procedure to change the Auto Focus area used in the Auto Focus Mode and the Macro Mode. Note that the configuration of the focus frame changes in accordance with the Auto Focus area you select.

1.In the REC mode, press [MENU].

2.On the “REC” tab, select “AF Area”, and then press [ ].

3.Select the Auto Focus area you want, and then press [SET].

For this type of Auto Focus area:			Select this:
Very limited range in the center of the			Spot
screen
•	This setting works well with focus lock
	(page 69).
Automatic selection of the focus area where			Multi
the subject closest to the camera is located
•	With this setting, a wide focus frame,
	which contains five focus points, appears
	on the monitor screen first. When you
	press the shutter release button half way,
	the camera automatically selects the focus
	point where the subject closest to the
	camera is located, and a focus frame
	appears at that point.
•	This setting works well for group photos.
• Spot		• Multi

Focus frame Focus frame

66