Casio TE-100 PLU feature programming, :D9, :D8, :D7, :D6, :D5

To a new (not sequential) PLU

PLU feature programming

There are two different methods you can use to assign features to PLUs.

With “Batch feature programming”, you can use a single operation to assign multiple features. “Individual feature programming”, on the other hand, let you assign features one-by-one. This method is recommended for programming of special features to individual PLUs.

Batch feature programming

When using this procedure to assign multiple features to PLUs, use 9-digit codes that you create using the following procedure.

Different program to the next PLU

PGM 63s6 PLU No. +6

(1 ~ 1200)

Mode Switch

6 :::::::;; 6 a 6 s

D9 D8 D7 D6 D5 D4 D3 D2 D1

Negative PLU	a	No = 0
		Yes = 2	a+b =	:D9
Hash PLU	b	No = 0
		Yes = 4
Single item sale	a	No = 0
		Yes = 1	a+b =	:D8
Treat as subdepartment/PLU.	b	PLU = 0
		Subdept. = 4
High digit limit specification (for subdepartment)		Significant		:D7
		number
Taxable status 1	a	No = 0
		Yes = 1
Taxable status 2	b	No = 0	a+b+c =	:D6
		Yes = 2
Taxable status 3	c	No = 0
		Yes = 4
Taxable status 4		No = 0		:D5
		Yes = 4
Department link (00 ~ 24)		Significant	::D4 D3
		numbers
Always “00”			;;D2 D1

Convenient Operations and Setups

57 E