Part-1QUICK START OPERATION

1.Initialization and loading memory protection battery

1-Part
Important

You must initialize the cash register and install the memory protection batteries before you can program the cash register.

◗To initialize the cash register

1.Set the mode switch to OFF.

2.Plug the power cord of the cash register into an AC outlet.

3.Load the memory protection batteries.

4.Set the mode switch to REG.

◗To load the memory protection batteries

1.Remove the printer cover.

2.Press down on the oval just behind the printer paper inlet, and slide the battery compartment cover toward the back of the cash register.

3.Load 3 new UM-3, R6P (SUM-3) or LR6 (AM-3) type batteries into the compartment. Be sure that the plus (+) and minus (–) ends of each battery are facing in the directions indicated by the illustrations inside the battery compartment (Figure 1).

4.Slide the memory protection battery compartment cover back into place.

5.Replace the printer paper and printer cover.

REPLACE MEMORY PROTECTION BATTERIES AT LEAST ONCE EVERY YEAR.

(Figure 1)

2.To select the language

You can select the default printing language depending on the requirements in your area. Example: Change the language to Spanish.

1.Set the mode switch to PGM.

2.Press the following keys.

X>>>{Select numbers from list A.

▲

Language selections

English Z>>>

Spanish X>>>

A French C>>>

German V>>>

3.To select date format and monetary mode

You can select t the date format and the monetary mode.

Example: Change the date format to Month/Day/Year, and the monetary mode to Add 0.

1.Set the mode switch to PGM.

2.Press the following keys.

Co ?ZXXo Z?p o

P3 appears in mode display

Program set code number

Select numbers from

▲

lists B and C.

 

(To end the setting)

 

Date format selections

 

Year/Month/Day

?

B

Month/Day/Year

Z

 

Day/Month/Year

X

 

 

 

Monetary mode selections

 

 

 

 

 

 

Add 0

(0.

)

?

C

Add 1

(0.0

)

Z

 

Add 2

(0.00

)

X

E

9