
User Maintenance and Options
To replace journal paper
REG2 X1
REG1 Z1
OFF X2/Z2
RF
PGM
1
Set the mode switch to the REG1 position and remove the printer cover.
2
Press jto feed about 20 cm of paper.
3
Cut the journal paper at the point where nothing is printed.
6
Cut the journal paper as shown in the photograph.
7
Press jto feed the remaining paper from the printer.
4 |
| 8 |
Remove the journal |
| Do not pull the paper out |
reel from its holder. |
| of the printer by hand. It |
|
| can damage the printer. |
|
|
|
5 |
| 9 |
Slide the printed journal |
| Remove the old paper roll |
from the |
| from the cash register. |
|
|
|
0
Load new paper as described on page 10 of this manual.
108