Casio WK220, WK225 Using Chorus, Using Reverb, To change the split point, 1 to, Off (oFF), “Chorus” (page E-7), “Reverb” (page E-7), the chorus type you want

Controlling the Keyboard Sounds

5. Pressing co again to unsplit the keyboard (so it
		Using Chorus
	plays only the tone you selected in step 1).
	• Each press of co toggles between split (two tones) and	Chorus is a function that adds depth and breadth to notes. It
	unsplit (one tone).	makes you sound as if you are playing multiple instruments.
		1. Press ct (FUNCTION) and then use the br
			(10-key) [4] (o) and [6] (p) keys to display
• If you turn on both layer and split, layering will be applied to
	the right side range of the keyboard only.		“Chorus” (page E-7).
	To change the split point
			C h o r u s

1.While holding down co, press the keyboard key

where you want the split point to be.	2. Use the br (10-key) [–] and [+] keys to select
The key you press will become the lowest note of the right
side range of the split keyboard.	the chorus type you want.
Example: Setting middle C (C4) as the split point.	There are five chorus types, plus an off setting.
Key name

		C 4
			Indicator disappears when chorus is turned off.
Using Reverb			• The actual effect produced by chorus depends on the tone
Reverb adds reverberation to notes. You can change the			you are using.
duration of the reverb.
1. Press ct (FUNCTION) and then use the br
	(10-key) [4] (o) and [6] (p) keys to display
	“Reverb” (page E-7).
		R e v e r b
2. Use the br (10-key) [–] and [+] keys to select
	the reverb setting you want.
Off (oFF)		Turns off reverb.
1 to 10		The larger the number selected, the longer
		the reverb duration.

Indicator disappears when reverb is turned off.

E-16