Casio WK220, WK225 Display, to edit, Settings, 10. Press, Setting Type, setting you want, 5. Press bo (RHYTHM), pattern you selected in step, you want (intro through ending)

Editing Auto Accompaniment Patterns

3. Press a button from 6 to 9 to select the							7. To edit the other contents, press ct
	Accompaniment Pattern you want to edit.							(FUNCTION) to display the screen for the
	The name of the pattern will appear on the display.							setting you want.
								• Each press of ct (FUNCTION) will cycle through the
									settings shown below, from 1 through 6.
				D r m : R h y				•	Use the br (10-key) [–] and [+] keys to change the
									currently selected setting.
								•	You can play the current settings of the editable part by
									pressing bk.
									Setting Type	Display	Settings
							1	Part on/off		Part	On/Off
8 Variation selected
							2	Tone number*		Tone	001 - 583
	Pattern selected by each button
							3	Volume level		Vol.	000 - 127
	6: Intro
								Left-right speaker
	7: Normal, Normal Fill-in						4			Pan	–64 - 0 - +63
		(Each press toggles the selection.)						balance (panning)
	8: Variation, Variation Fill-in						5	Reverb depth		Rvb	000 - 127
		(Each press toggles the selection.)						(reverb send)
	9: Ending
							6	Chorus depth		Cho.	000 - 127
4. Press bl to select the instrument part you want								(chorus send)
							* Instrument parts 1 and 2 can be assigned drum set tones
	to edit.
	The part number of the part you select will flash on the						only.
	display.						8. Repeat steps 4 through 7 as many times as
					Flashing: Part selected for editing.			necessary to edit the parts you want for the
								pattern you selected in step 3.
								•	If you change the rhythm number in step 6, the editable
									contents (1 through 6 in the above table) you last
									configured in step 7 of this procedure will be overwritten
									with the settings of the newly selected rhythm.
			Parts that contain data.			Part 6 (Chord 3)	9. Repeat steps 3 through 8 as many times as
5. Press bo (RHYTHM).								necessary to edit the accompaniment patterns
								you want (intro through ending).
	This will display the rhythm name.
6. Use the br (10-key) [–] and [+] keys to select							10. Press 4.
	the rhythm number you want to assign to the							This will display a message asking if you want to save the
								user rhythm.
	instrument part you are editing.

A different rhythm number is assigned for each instrument part.

•You can play the data of the currently selected rhythm number by pressing bk.

•All of the eight instrument parts of an intro (I-1 to 8) must have the same rhythm number. If you assign rhythm 003 to I-1, for example, 003 also will be assigned automatically to parts I-2 through I-8. If you then assign rhythm 004 to part I-2, for example, I-1 and all of the other parts also will change to 004. All of the eight parts of an ending (E-1 to E-8) also must have the same rhythm number.

E-46