Projection Operations
Enlarging the Projected Image (D-ZOOM +/–)
You can use the remote controller’s zoom keys to enlarge a specific part of the projected image up to four times its original size.
To enlarge part of the projected image
1. On the remote controller, press the
z This causes a cross cursor ( ) to appear on the projected image.
2.Use the remote controller’s cursor keys to move the cross cursor to the part of the image that you want in the center of the enlarged image.
3. On the remote controller, press the
zYou can press the
zYou can back step through the image enlargements by pressing the
zYou can shift the zoomed image up, down, left, or right by pressing the applicable remote controller cursor key.
4.To exit image enlargement and return the image to its original size, press the remote controller’s [ESC] key.
14