Appendix
Problem | Cause and Recommended Action | See |
|
|
|
The projector does not | The connected computer or video device may not | — |
project any image from the | be turned on, or it may not be outputting a video |
|
connected device. | signal. |
|
| JMake sure the connected computer or video |
|
| device is turned on, and perform the required |
|
| operation on it to output a video signal. |
|
|
|
|
| The correct output source is not selected on the | page 6 |
| projector. |
|
| JOn the projector, select the input source that |
|
| corresponds to the device whose image you |
|
| are trying to project. |
|
|
|
|
The projector does not | Images may not project correctly when you have | User’s |
correctly project the image | the component output terminal of a video device | Guide |
from the connected device. | connected to the RGB terminal of the projector. | (Basic |
| JTry using the projector’s VIDEO input terminal | Operation) |
| or |
|
| a Standard Video Device”). |
|
|
|
|
| Images sent from a computer over an RGB cable | page 42 |
| may not project correctly if [Component] is |
|
| selected for the “Input Settings J RGB Input” |
|
| menu setting. |
|
| JTurn off the projector and disconnect the AC |
|
| cord and RGB cable. Next, reconnect the AC |
|
| cord only and turn on power. Change the |
|
| “Input Settings J RGB Input” menu setting to |
|
| [RGB]. Try projecting again. |
|
|
|
|
When RGB/Component is | The settings configured on the setup menu’s | page 42 |
selected as the input | “Input Settings J RGB Input” menu may not be |
|
source, the color of the | compatible with the device connected to the RGB |
|
projected image or the | input terminal. |
|
image itself is abnormal. | JUse the setup menu to configure the “Input |
|
| Settings J RGB Input” menu settings to correct |
|
| the problem. |
|
|
|
|
The projector keys to not | Key lock or power on password may be turned | page 47 |
work. | on. |
|
| JTurn off key lock and/or power on password. |
|
|
|
|
73