Appendix

Connecting to a Component Video Output Device

Some video devices are equipped with a component video output terminal. You can use an optionally available component video cable (YK-3) to connect the RGB input terminal of the projector to the component video output terminal of a video device.

zAlways turn off the projector and the video device before connecting them.

Projector

RGB input terminal AUDIO input terminal

Commercially available audio cable

To AUDIO output

 

terminal

Video device

 

 

Optional component video cable (YK-3)

To Component video output terminal

zComponent video output terminals come in 3-terminal sets: Y·Cb·Cr or Y·Pb·Pr. Be sure to match the colors of the plugs on the optional YK-3 component video cable with the colors of the terminals (Green: Y; Blue: Cb/Pb; Red: Cr/Pr).

zYou can use the optional YK-3 component video cable to connect to pin jack (RCA) type component video output terminals. The projector does not support connection to any other type of terminal.

zNote that connection only to an analog component video output terminal is supported. Connection to a digital output terminal is not supported.

zIn order to connect to a component video terminal, you must use the setup menu to configure input settings. For details, see “Input Settings J RGB Input” on page 42.

66