Using the Setup Menu

Setup Menu Screen Operations

This section explains projector operations you need to perform while configuring setup menu settings. It also provides details about each sub-menu item type.

Basic Setup Menu Operations

The following is the general flow of the steps you need to perform when configuring setup menu operations.

1. Select the input source whose settings you want to configure.

2. Press the [MENU] key.

zThis causes the setup menu screen to appear in the upper left corner of the projected image.

zThe setup menu has a main menu on the left side. On the right side is a sub-menu of settings that can be configured for the currently selected main menu item.

Main menu

Sub-menu

zThe items that appear in the sub-menu depends on the currently selected input source, and whether or not a signal is being input from the input source. For details, see “Setup Menu Overview” on page 21.

3.Use the [S] and [T] keys to select the main menu whose sub-menu contains the settings you want to configure.

zThe settings for the selected main menu item appear in the sub-menu.

24