Wired LAN Settings Main Menu (USB Port Models Only)
Setting Name | Input | Setting Unit | Description |
Remote on | R C V H D U N | Single | Specifies whether the projector can be turned on via wired LAN |
|
|
| while the projector is in standby (projector off with power being |
|
|
| supplied). |
|
|
| Enable: |
|
|
| Power on enabled. |
|
|
| Disable*: |
|
|
| Power on disabled. |
|
|
| Important! |
|
|
|
|
|
|
| |
|
|
| Performing an “Initialize Network Settings” operation or |
| |
|
|
| “Restore All Defaults” operation with the setup menu will |
| |
|
|
| cause this setting to change to “Disable”. If you are operating |
| |
|
|
| the projector using a wired LAN setting, be sure to change |
| |
|
|
| this setting back to “Enable” after initialization. |
| |
|
|
|
|
| |
PJLink | R C V H D U N | Single | Enables and disables PJLink connection authentication. |
| |
authentication |
|
| Enable*: |
| |
|
|
| PJLink connection authentication enabled. |
| |
|
|
| Disable: |
| |
|
|
| PJLink connection authentication disabled. |
| |
|
|
|
|
| |
Wired LAN info | R C V H D U N | Single | Displays the following information. |
| |
|
|
| Projector name: |
| |
|
|
| Name currently assigned to the projector. |
| |
|
|
| MAC Address: |
| |
|
|
| Fixed MAC address assigned to each individual projector. |
| |
|
|
| IP Address: |
| |
|
|
| Projector’s current IP address. |
| |
|
|
| DHCP: |
| |
|
|
| Projector’s current DHCP setting status (“Auto” or “Disable”). |
| |
|
|
| The projector name, IP address, and DHCP settings can be |
| |
|
|
| configured using the projector System Admin page, which can be |
| |
|
|
| accessed on a computer connected by LAN to the projector. For |
| |
|
|
| details, see the “Wireless Function Guide” on the |
| |
|
|
| comes with the projector. |
| |
|
|
|
|
| |
Initialize | R C V H D U N | Single | Returns all projector network settings (all settings on the System |
| |
Network |
|
| Admin page) to their initial defaults. |
| |
Settings |
|
| For detailed information about System Admin page settings, see the |
| |
|
|
| “System Admin Page Settings” section in the “Wireless Function |
| |
|
|
| Guide” on the |
|
USB Settings Main Menu (USB Port Models Only)
The USB Settings main menu is available only when there is an external device connected to the USB port of the projector. For details, see the “USB Function Guide” and “Wireless Function Guide” on the bundled
D | 37 |
|