Eco Mode
Turning on the Eco Mode reduces lamp brightness to save power. The projector’s cooling fan also operates at a slower speed while the Eco Mode is turned on, which results in quieter operation.
Turn on the Eco Mode when your priority is quieter operation. Turn off the Eco Mode when your priority is maximum brightness.
To turn the Eco Mode on or off
Press [ECO] to toggle the Eco Mode on and off.
Note
(for USB port equipped model users)
Use the setup menu (page 11) to select the lamp mode when you have an external device connected to the projector’s USB port.
Using the [FUNC] Key
Pressing the [FUNC] key displays the menu shown below.
You can use this menu to perform the operations described below.
zAdjust image brightness
Highlight “Brightness” and then press the [ENTER] key.
•This performs the same operation as pressing the [BRIGHT] key (
key) described on page 5.
zTurn the Eco Mode on or off
Highlight “Eco Mode” and then press the [ENTER] key.
•This performs the same operation as pressing the [ECO] key (U key) described on page 10.
zSelect the aspect ratio of the projected image Highlight “Aspect Ratio” and then press the [ENTER] key.
•This performs the same operation as pressing the [ASPECT] key ( key) described on page 9.
Note
(for USB port equipped model users)
When you have an external device connected to the projector’s USB port, use the [FUNC], [
], [U], and [
] keys to control the connected device. For details, see the “USB Function Guide” on the bundled
10