Casio XJH2650 Loading Remote Controller Batteries, Setting Up the Projector, *Caution, Replacing Remote Controller Batteries

Loading Remote Controller Batteries

Important!

Be sure to use alkaline batteries only.

	*Caution	RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
	*Caution	DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
		DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

1. Open the battery cover on the back of the remote controller.

2. Load two new batteries into the case, making sure that their positive

(+)and negative (–) ends are facing correctly.

3. Close the battery cover on the back of the remote controller.

Replacing Remote Controller Batteries

Open the battery cover on the back of the remote controller, replace the old batteries with new ones, and then close the battery cover.

Setting Up the Projector

Place the projector onto a table, desk, or stand that is level and firm, making sure you allow enough room around it. Best results can be obtained when the projector is pointed directly at the screen, and not at an angle.

XJ-H1600/XJ-H1650/XJ-H1700/XJ-H1750XJ-H2600/XJ-H2650/XJ-ST145/XJ-ST155

Screen

z The projector can be configured for projection from the back of a screen. For details, see “Projection Mode” (page 42) under “Screen Settings Main Menu”.