Setting Name |
|
| Input | Setting Unit | Description | ||||
|
|
|
|
|
|
|
|
| |
Restore Menu | R | C | V | H | D | U | N | Source | Use this |
Defaults |
|
|
|
|
|
|
| Specific | Settings main menu to their initial default settings. |
|
|
|
|
|
|
|
|
| z Restoring menu defaults when there is no input signal will restore |
|
|
|
|
|
|
|
|
| defaults for the currently selected input source. |
|
|
|
|
|
|
|
|
| z Note that the “Keystone Correction”, “Projection Mode”, “Ceiling |
|
|
|
|
|
|
|
|
| Mount”, “Startup Screen”, “No Signal Screen”, and “Blank |
|
|
|
|
|
|
|
|
| Screen” settings are always returned to their initial defaults, |
|
|
|
|
|
|
|
|
| regardless of the currently selected input source. |
|
|
|
|
|
|
|
|
|
|
Input Settings Main Menu
Setting Name | Input | Setting Unit | Description |
COMPUTER1 | R C | N Single | Use this |
Terminal/ |
|
| from the projector’s COMPUTER IN 1/COMPUTER IN 2 terminal. |
COMPUTER2 |
|
| Auto*: |
Terminal |
|
| Automatically detects the signal being input from the COMPUTER |
|
|
| IN 1/COMPUTER IN 2 terminal and configures the appropriate |
|
|
| input protocol. |
|
|
| RGB: |
|
|
| Select this option when a computer is connected to the |
|
|
| COMPUTER IN 1/COMPUTER IN 2 terminal. For details about |
|
|
| connecting a computer, see “Connecting the Analog RGB Output |
|
|
| |
|
|
| Component: |
|
|
| Select this setting when the projector’s COMPUTER IN 1/ |
|
|
| COMPUTER IN 2 terminal is connected to the component video |
|
|
| output terminal of a video device using a commercially available |
|
|
| component video cable. For information about connection, see |
|
|
|
|
|
| Note |
|
|
|
|
|
|
| |
|
|
| The setting of this item cannot be changed while the projector |
| |
|
|
| is in the 3D input mode (“3D Input Mode”, page 17) or “On” is |
| |
|
|
| selected for the “Option Settings 2 J Interactive Pointer” |
| |
|
|
| setting. |
| |
|
|
|
|
| |
Video Signal/ | V | N Single | Use this |
| |
|
| from the projector’s VIDEO terminal or |
| ||
|
|
| Auto*: |
| |
|
|
| Select this setting to have the projector switch the video signal |
| |
|
|
| system automatically in accordance with the input signal from the |
| |
|
|
| video device that is connected to the VIDEO terminal or |
| |
|
|
| terminal. |
| |
|
|
| NTSC / NTSC4.43 / PAL / |
| |
|
|
| Each setting selects the applicable video system. Use these |
| |
|
|
| settings when you want to specify only one specific video signal |
| |
|
|
| for the VIDEO terminal or |
| |
43