Selecting the Color Mode

You can select from among various different color mode settings in accordance with image contents and projection conditions.

Important!

z The color mode cannot be selected in the following cases. z When “Off” is selected for the Eco Mode setting (page 25)

z When the projector is in the 3D input mode. See “3D Input Mode” (page 17).

z The color mode cannot be selected while “On” is selected for the setup menu “Option Settings 2 J Interactive Pointer” setting. Though the color mode change operation may be possible on some projector models, doing so may cause problems with the optional interactive pointer (YA-P10) in some color modes.

To change the color mode

1. Press the [COLOR MODE] key.

z This displays the color mode selection window. The currently selected color mode is the one whose button is selected (filled in).

2. Use the [T] and [S] keys to move the highlighting to the color mode you want to select, and then press the [ENTER] key.

z This will select the button next to the highlighted color mode name.

z For details on what each color mode does, see “Color Mode” (page 39) under “Image Adjustment 1 Main Menu”.

3. To hide the window, press the [ESC] key.

Zooming an Image

1. Press the [D-ZOOM +] key.

z This will enlarge the center of the projected image one step.

2. To zoom in on the center of the projected image more, press the [D-ZOOM +] key again. To zoom out, press the [D-ZOOM –] key.

zEach press of [D-ZOOM +] zooms in (increases the zoom factor), while [D-ZOOM –] zooms out. Holding down either key continuously scrolls the zoom factor.

3.

4.

While an image is zoomed, use the [S], [T], [W], and [X] keys to scroll the view to other parts of the image.

To exit the zoom operation, press the [ESC] key.

20