z You also could select “No Signal Screen” or “Blank Screen” in place of “Startup Screen” to use the custom logo for another type of screen.
4. Use the [W] and [X] keys to select “Custom Logo”.
5. After you are finished, press the [MENU] key to exit the setup menu.
31
Use the [T] key to select “Screen Settings”, and then press the [ENTER] key.
Press the [MENU] key to display the setup menu.
1.
2.
3. To specify the custom logo as the Startup Screen, use the [T] key to select “Startup Screen”, and then press the [ENTER] key.
To specify a custom logo as the startup screen, no signal screen, or blank screen
The projected screen of protected contents cannot be captured.
All input sources
Supported Capture Images

Not all types of projection images are supported. Note the following precautions that correspond to each specific input source.

Input Source

Precautions

RGB

Use an image with a resolution no greater than 1280 × 800. You will not be able to execute

 

the screen capture operation if the projected image has a resolution larger than this.

 

 

Video, S-video

Any closed captioning included in the projected image is not included in the captured

 

image.

 

 

USB

Basically screens projected from the input source can be captured. The following types of

 

images are supported.

 

z Still images or movie images being projected with Viewer

 

z PC screens projected by Wireless

 

z Images projected by YC Camera

 

z Graphic calculator screen image projected via a USB connection

 

For details about projecting these types of screens, see the “USB Function Guide” and

 

“Wireless Function Guide”.