Group |
| Item | Description | |||
Image | Input | Specifies the input source. The following are the available input source | ||||
|
| options. |
|
|
| |
|
|
|
|
|
|
|
|
|
| 3D Off |
| 3D On |
|
|
|
| Computer (Auto) |
| Computer (RGB) |
|
|
|
|
|
|
|
|
|
|
| Computer (RGB) |
| Video |
|
|
|
|
|
|
|
|
|
|
| Computer (Component) |
|
| |
|
|
|
|
|
|
|
|
|
| Video |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| HDMI |
|
|
|
|
|
|
|
|
|
|
|
|
| USB |
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
| 3D | Puts the projector into the 3D input mode or normal input mode. | ||||
|
|
| On: 3D input mode |
|
|
|
|
|
| Off: Normal input mode |
|
|
|
zNote that this setting cannot be change while the currently selected input source is “Computer (Component)”, “HDMI”, or “USB”.
| Color mode | Specifies the color mode. |
|
| z For details about this setting, see “Selecting the Color Mode” (page |
|
| 13). |
|
|
|
| Blank | Selecting “On” for this setting temporarily blocks the image from the |
|
| input source. “Off” causes the image from the input source to be |
|
| projected. |
|
| z The operation of this item is identical to that of the remote controller’s |
|
| [BLANK] key. For details, see “Momentarily Cutting Off the Input |
|
| Source Image” (page 14). |
|
|
|
| Aspect ratio | Changes the aspect ratio of the projected image. |
|
| z For details about this setting, see “Changing the aspect ratio of the |
|
| projected image” (page 16). |
|
|
|
| Brightness | This corresponds to the “Image Adjustment 1 J Brightness” setting of |
|
| the setup menu. Input a value into the box and then click the [Apply] |
|
| button. This will change the projector’s “Brightness” setting accordingly. |
|
|
|
| Contrast | This corresponds to the “Image Adjustment 1 J Contrast” setting of the |
|
| setup menu. Input a value into the box and then click the [Apply] button. |
|
| This will change the projector’s “Contrast” setting accordingly. |
|
|
|
| Eco Mode | Switches the Eco mode. |
|
| z For details about this setting, see “Eco Mode (Power Saving, Low |
|
| |
|
|
|
Audio | Volume | Input a value into the box and then click the [Apply] button. This will |
|
| change the volume setting accordingly. |
|
|
|
| Mute | Specifies the mute setting. Audio is output while “Off” is selected for this |
|
| setting, and muted when “On” is selected. |
|
|
|
| Audio Out | Specifies either output from the projector’s speaker output or AUDIO |
|
| OUT terminal for audio. |
|
| Speaker: Audio output from the speaker |
|
| Line: Audio output from the AUDIO OUT terminal |
B | 58 |
|