z See the “Command List” for details about command names and settings. z All commands use ASCII characters and decimal format integers.
z The projector will return a question mark (?) when it is sent a command it cannot recognize. Also, any command that attempts to set a value that is outside the applicable allowable range will be ignored.
z If the projector is performing a process initiated by a previously sent command, a projector key operation, or a remote controller key operation, send of the next command must wait until the projector completes the previous process.
Command List
z Only the following functions are supported while the projector is turned off. Do not try to send any other command to the projector.
z Power on/off: Read
z Power on: Write
z Get light time: Read
z Input of a valid signal must be in progress in order to use a command to turn on blank screen or change the aspect ratio.
R: Read enabled W: Write enabled
Function | Command | RW | Setting Range | |
Name | ||||
|
|
| ||
Power On/Off: | PWR | RW | 0: Off, 1: On | |
|
|
|
| |
Input Switching: 0: Switches the input source to the | SRC | RW | 0: RGB, 1: Component, | |
COMPUTER terminal and changes the |
|
| 2: Video, 5: USB, | |
COMPUTER terminal setting to RGB. |
|
| 6: Auto (RGB/Component), | |
1: Switches the input source to COMPUTER |
|
| 7: HDMI, 9: | |
terminal and changes the COMPUTER |
|
|
| |
terminal setting to component. |
|
|
| |
2: Switches the input source to Video. |
|
|
| |
5: Switches the input source to USB. This |
|
|
| |
setting is supported only when the |
|
|
| |
projector is equipped with a USB function |
|
|
| |
and the USB application is running. |
|
|
| |
6: Switches the input source to COMPUTER |
|
|
| |
terminal and changes the COMPUTER |
|
|
| |
terminal setting to Auto. |
|
|
| |
7: Switches the input source to HDMI. |
|
|
| |
9: Switches the input source to |
|
|
| |
|
|
|
| |
Blank Screen: Switches the blank screen on or off. | BLK | RW | 0: Off, 1: On | |
|
|
|
| |
Volume: Specifies a value to adjust the volume level. This | VOL | RW | ||
setting is applied to the input source signal that is |
|
|
| |
currently being projected by the projector. |
|
|
| |
|
|
|
| |
Color Mode: Selects the color mode. | PST | RW | 1: Graphics, 2: Theater, | |
|
|
| 3: Standard, 4: Blackboard, | |
|
|
| 5: Game | |
|
|
|
| |
Aspect Ratio: Specifies the aspect ratio. | ARZ | RW | 0: Normal*1, 1: 16:9, | |
|
|
| 2: Normal*2, 3: Letter Box, | |
|
|
| 4: Full, 5: True | |
|
|
|
| |
Get Light Time: Gets the light time from the projector. | LMP | R | 0- Unit: Hours | |
|
|
|
|
*1 Input source: RGB or HDMI (PC)
*2 Input source: Video,
61