Casio manual 41

Indicator/Error Message		Description and Required Action
POWER	: Green steady	A system problem has occurred, which may cause problems with some
LIGHT	: –	functions. Turn off the projector, disconnect the power cord from the
		projector and wait for all of the projector’s indicators to go out. Next,
TEMP	: –
		reconnect the power cord and turn the projector back on.
Message	: A system problem has	If the error occurs again when you turn power back on, contact your
		retailer or nearest authorized CASIO Service Center.
	occurred. Normal
		Press the [ESC] key to clear the warning message.
	projection is not possible.
POWER	: Green steady
LIGHT	: –
TEMP	: –
Message	: There is some problem
	with the system.
	The audio function may
	not operate correctly.
POWER	: Green steady	The USB or LAN connection was terminated because of a problem with
LIGHT	: –	the USB port or LAN port. To use the USB or LAN function, turn off the
		projector and then turn it back on again.
TEMP	: –
		If the error occurs again when you turn power back on, contact your
Message	: Some problem occurred	retailer or nearest authorized CASIO Service Center.
		Press the [ESC] key to clear the warning message.
	with the USB port or LAN
	terminal.
POWER	: Amber flashing J	The projector was turned off automatically due to some problem that was
	Red steady	probably caused by external digital noise or some other reason. Confirm
LIGHT	: –	that the POWER/STANDBY indicator is lit red (without flashing). After
		checking the POWER/STANDBY indicator, disconnect the power cord
TEMP	: Red steady
		from the projector and wait for all of the projector’s indicators to go out.
Message	: –	Next, reconnect the power cord and turn projector power back on.
		If the error occurs again when you turn power back on, contact your
		retailer or nearest authorized CASIO Service Center.
POWER	: Amber flashing J	The projector was turned off automatically because the light source unit
	Red steady	turned off or did not turn on. After confirming that the POWER/STANDBY
LIGHT	: Red flashing	indicator is lit red (without flashing), unplug the power cord. Wait for a
		short while and then plug it back in and turn on the projector again.
	(0.5-second interval)
		If the error occurs again when you turn power back on, contact your
TEMP	: Red flashing
		retailer or nearest authorized CASIO Service Center.
	(0.5-second interval)
Message	: –
POWER	: Amber flashing J	Power has turned off automatically due to a projector memory error.
	Red steady	Confirm that the POWER/STANDBY indicator is lit red (without flashing).
LIGHT	: Not lit or red flashing	After checking the POWER/STANDBY indicator, disconnect the power
		cord from the projector and wait for all of the projector’s indicators to go
TEMP	: Red flashing
		out. Next, reconnect the power cord and turn projector power back on.
	(2-second interval)	If the error occurs again when you turn power back on, contact your
Message	: –	retailer or nearest authorized CASIO Service Center.

41