6Remove the bolts holding the reflector bracket to the skew housing.
Reflector bracket
Skew housing
NOTE If replacing a Slimline assembly with a DISH assembly, remove and set aside
the stiffener plate inside the reflector bracket.
7Remove the LNB arm assembly, and set aside.
Stiffener
plate 
NOTE If replacing a Slimline assembly with a DISH assembly, remove the four bolts from the adaptor plate, and remove the adaptor plate.
Adaptor plate |
Bolts |
Installing the DISH Reflector and LNB Assembly
NOTE If replacing a Slimline assembly with a DISH assembly, align the small post on the back of the DISH 1000 adaptor plate with the small
groove on the skew assembly hub. Fit the small post into the groove. Secure the adaptor plate to the hub with the four supplied ¼ inch Allen screws.
Groove
Post 
