4.DISPOSAL OF HOUSEHOLD APPLIANCES
Under the European directive 2002/96/EC on waste from electrical and electronic equipment (WEEE),
household appliances may not be disposed of at normal landfill sites. Old appliances must be collected separately to optimise the recovery and recycling of their materials and to prevent potential harm to health and the environment. The symbol of a bin with a cross is affixed on all products, to remind users that
they must dispose of the product separately. For further information on how to dispose of household appliances, users should contact a public authority or their dealers.
CE This appliance has been manufactured in compliance with EN 60204
directives:
5.INSTALLING THE APPLIANCE
(fig. 2)
568
400
450
G |
458 |
| 550 | |
| 445 | |
595 | 350 | |
19 | ||
|
Make sure the beer dispenser can fit into the cabinet (fig 2).
1.Drill a Ø 5 cm hole at the back of the cabinet base (fig. 2) to pass the beer flow line through (fig. 2).
2.Position the dispenser, after connecting the mains lead and passing the beer flow line “G” (fig. 2) through the cabinet base (where the keg is stored) (fig 2).
3.Secure the dispenser to the base using the 2 screws provided, inserted in the two holes in the drip tray storage area.
4.Fit the tray and rack.
5.Fit the control unit on the side of the cabinet, placing it against the base and secure with the 4 screws provided (fig. 2).
6.Insert the adaptor (same type as the dispense head) in the washing attachment.
7.Carefully connect fitting “H” (fig. 1), positioned at the end of the beer flow line “G” (fig. 1) to the beer outlet connection of the dispense head “I” (fig. 1).
8.Carefully connect fitting “K” (fig. 1) , positioned at the end of the CO² flow line “M” (fig. 1) to the CO² inlet connection of the dispense head “I” (fig. 1).
9.Fit the dispense head on the keg attachment and secure lowering the dispense head lever and making sure it is fitted properly to avoid beer and CO² leaks. Click to secure.
Always check with your keg retailer which system is compatible with the keg you require (Sankey
6 |
|
| IC43 |
|
|