12

TIPS FOR INSTALLATION

Location

–The appliance may be installed in a kitchen, Kitchen/diner or a bed sitting room, but not in a room or space containing a bath or a shower.

–The appliance must not be installed in a bed-sit room of less than 20m3.

–The appliance is designed and approved for domestic use only and should not be installed in a commercial, semi commercial or communal environment.

–Your product will not be guaranteed if installed in any of the above environments and could affect any third party or public liability insurances you may have.

–This hob should only be installed by a qualified installer. Failure to observe this rule leads to cancellation of the guarantee.

–The appliance must be installed correctly, in compliance with the regulations in force and following the manufacturer's instructions.

–Any repair or maintenance must be performed with the appliance switched off.

–These appliances have been designed and manufactured to be fitted into heat-resistant units.

–These hobs are designed to be fitted into 600mm deep kitchen units.

–The unit walls must not be higher than the working surface and must withstand a temperature of 105°C above room temperature.

–Avoid installation near inflammable materials (e.g. curtains).

Ventilation Requirements

–The appliance should be installed into a room or space with an air supply in accordance with BS 5440-2: 2000.

–For rooms with a volume of less than 5m3 - permanent ventilation of 100cm2 free area will be required.

–For rooms with a volume of between 5m3 and 10m3 a permanent ventilation of 50cm2 free area will be required unless the room has a door which opens directly to the outside air in which case no permanent ventilation is required.

–For rooms with a volume greater than 10m3 - no permanent ventilation is required.

Important !

Regardless of room size, all rooms containing the appliance must have direct access to the outside air via an openable window or equivalent.

–Where there are other fuel burning appliances in the same room, BS 5440-2: 2000 should be consulted to determine the correct amount of free area ventilation requirements.

–The above requirements allow also for use of a gas oven and grill but if there are other gas burning appliances in the same room, consult a qualified engineer.

Page 11 Page 13
Page 12
Image 12
CDA HCG 731, HCG 741 manual Location, Ventilation Requirements
Page 11 Page 13

HCG 741, HCG 731 specifications

CDA, a prominent name in the realm of high-quality kitchen appliances, has introduced two standout models: the HCG 741 and HCG 731. These gas cookers blend functionality, technology, and modern design, appealing to culinary enthusiasts and home cooks alike.

The CDA HCG 741 features a sleek design with a stainless steel finish that not only enhances its aesthetic appeal but also ensures durability and easy maintenance. It is equipped with four gas burners, providing ample cooking space for multiple dishes simultaneously. The burners are designed for efficiency, offering precise control over heat levels, which is crucial for achieving perfect cooking results. The HCG 741 also comes with a spacious oven, allowing users to bake, roast, and grill with ease.

One of the main highlights of the HCG 741 is its programmable timer and electronic ignition system. The electronic ignition sparks to life with just the push of a button, eliminating the need for matches or lighters. The touchscreen controls are intuitive and user-friendly, making it simple to adjust settings and monitor cooking times. The oven features a fan-assisted design, ensuring even heat distribution for uniform cooking results.

On the other hand, the CDA HCG 731 boasts similar features with a slightly different layout and design. This model has a compact size, making it ideal for smaller kitchens without compromising on functionality. It also features four gas burners, but its distinct layout allows for an innovative space-saving design. The HCG 731 includes a brilliant enamel interior in the oven that not only enhances heat retention but also simplifies cleaning processes.

Both models are equipped with safety features, including flame failure devices that automatically cut off the gas supply if a flame goes out, ensuring peace of mind while cooking. Additionally, CDA ensures that both cookers are energy-efficient, helping users save on energy costs while maintaining high performance.

In conclusion, the CDA HCG 741 and HCG 731 represent the culmination of advanced technology, safety, and modern aesthetics in the kitchen appliance market. Whether you prefer the expansive cooking space of the HCG 741 or the compact efficiency of the HCG 731, both cookers deliver exceptional performance for any cooking endeavor. Their combination of stylish design, innovative features, and reliability makes them indispensable tools for any culinary enthusiast.
Top Page Image Contents