13
Installation
Technical Information for the Installer
In order to install the hob into the kitchen fixture, a hole with the dimensions shown in fig. 12 has to be made, bearing in mind the following:
–Within the unit, between the bottom of the hob and the upper surface of a shelf there must be a clearance of at least 30mm.
–It is absolutely essential that you place a separator between the base of the hob and the
–The hob must be kept no less than 200mm away from any side wall (fig. 12).
–The hob must be installed at least 60mm from the wall.
–There must be a distance of at least 650mm between the hob and any wall cupboard or extractor hood positioned immediately above (see fig. 14).
– If the hob is installed over a built- |
| 500 | 680 | |
in oven, there must be a distance |
| |||
|
|
|
| |
of at least 30mm between the two |
|
|
|
|
appliances. The two appliances should |
| 0 |
|
|
be connected to the gas supply with | 20 |
| 0 | |
|
| |||
independent connections |
|
|
| 2 |
|
|
| – | |
|
|
|
| |
|
| 560 | 0 | 480 |
|
|
| ||
|
|
|
| |
| Fig. 12 |
|
|
|
60
Installation in Kitchen Cabinet with Door
It is recommended that a 30mm clearance be left between the cooktop and the fixture surface (fig. 13).
Clearance | mm | |
30 | ||
| ||
Door |
| |
Space for |
| |
connections | Fig. 13 | |
|
450 mm
Fig. 14
650 mm
