How to use the hob
The ceramic surface of the hob allows fast transmission of heat
vertically from the heating elements under the glass to the pans |
|
| |
on the hob top. |
|
| |
Ø 140mm |
|
| |
The heat does not spread horizontally, so the hob top remains |
|
| |
|
| ||
relatively cool only a few centimetres from the zone in use. |
|
| |
Ø 180mm |
|
| |
|
| fig. 4 | |
Please note: |
|
| |
|
|
| |
|
|
| |
|
|
|
|
The heating elements are equipped with a temperature limiter | Second element |
| |
that will switch the element off to prevent damage to the hob. |
| ||
|
|
| |
The temperature limiter may also operate when incorrect pans |
|
|
|
are used or pans are poorly positioned. This will affect cooking |
|
|
|
performance. |
|
|
|
The temperature limiter can be seen in the zone as the straight |
|
|
|
line out from the centre of the element. This is not a fault with |
|
|
|
the hob. |
|
| |
|
|
| |
| double zone | fig. 5 | |
To switch the hob on |
|
| |
|
|
| |
|
|
|
Touch and holduntil the zone displays show 0.
Please note:
If a zone is not selected or the timer set within 20 seconds, the hob will automatically switch off.
To switch on a zone
Once the hob is switched on, touchfor the zone required. The zone indicator will switch on to confirm the zone is active. EITHER Touch and holdto select the power level from 1 (minimum) to 9 (maximum). The power level selected will show on the zone display.
OR Touch and holdto select the power level from 9 to 1.
The zone will remain active for approximately ten seconds to allow for adjustment.
To adjust the power level once set
Touchfor the zone required. The zone indicator will switch on to confirm the zone is active.
Touch and holdoruntil the required power level shows on the zone display.
To use the dual zone
The dual zones are formed of two separate coils of resistant material.
The dual zone will switch on automatically when the zone is selected. Touchat any time to switch the dual zone on or off. The dual zone indicator will switch on when the dual zone is on.
To switch off a zone
Touchfor the zone required.
EITHER Touchandat the same time.
OR Touch and holduntil the zone display shows 0.
The zone display will alternate between 0 and H to indicate the residual heat.
To switch the hob off
Touch and holdat any time.
.
4