Enamelled Parts, GAS Taps, Control Knobs

ENAMELLED PARTS

✓All the enamelled parts must be washed only with a sponge with soapy water or other non-abrasive products.

✓Dry preferably with a soft cloth.

✓If acid substances such as lemon juice, tomato conserve, vinegar etc. are left on the enamel for a long time they will etch it, making it opaque.

✓Stainless steel parts should be rinsed with water and dried with a microfibre or soft cloth.

✓For persistent dirt, use specific non-abrasive products available commercially or a little hot vinegar.

✓Note: regular use will cause discolouring around the burners, because of the high flame temperature.

✓Regular lubrication of the gas taps must only be performed by specialised engineers.

✓If the gas taps are not working properly call the After-Sales Service.

✓The control knobs may be removed for cleaning but care should be taken not to damage the seal.