Enamelled parts
All the enamelled parts must be cleaned with a sponge and soapy water only or other
Dry preferably with a microfibre or soft cloth.
Stainless steel, aluminium, painted parts and silk- screen printed surfaces
Clean using an appropriate product. Always dry thoroughly.
Stainless steel surfaces: can be cleaned with an appropriate stainless steel cleaner.
IMPORTANT: these parts must be cleaned very carefully to avoid scratching and abra- sion. You are advised to use a soft cloth and neutral soap.
CAUTION: Do not use abrasive substances or
Changing the oven light
1.Disconnect the electrical power supply (for example, by switching off the main power switch).
2.Unscrew the light cover
3.Fit a new bulb.
4.Refit the cover.
Note:
Use only bulbs designed to resist up to 300°C with the following characteristics: 230 V, type E14 and same power (check watt power as stamped in the bulb itself) of the replaced bulb.
25
